Refractive lens exchange for presbyopia

True presbyopia correction still remains one of the main challenges amongst eye professionals. Many corrective techniques exist including bifocal spectacle correction, monovision techniques both with corrective lenses and surgery, multifocal corneal excimer laser and refractive lens exchange with either accommodating or multifocal lenses. Refractive lens exchange was first described more than 10 years ago and has become more accepted in recent years with advancements in lens technology and improvements in surgical techniques. This article reviews developments in this field and current available lens options in the treatment of presbyopia.     

Methodology for in-line rheology by ultrasound Doppler velocity profiling and pressure difference techniques

This paper describes a methodology for measuring rheological flow properties in-line, in real-time, based on simultaneous measurements of velocity profiles using an ultrasound velocity profiling (UVP) technique with pressure difference (PD) technology. The methodology allows measurements that are rapid, non-destructive and non-invasive and has several advantages over methods presented previously. The set-up used here allows direct access to demodulated echo amplitude data, thus providing an option to switch between time domain algorithms and algorithms based on FFT for estimating velocities, depending on the signal-to-noise ratio (SNR) and time resolution required. Software based on the MATLAB^® graphical user interface (GUI) has been developed and provides a powerful and rapid tool for visualizing and processing the data acquired, giving rheological information in real-time and in excellent agreement with conventional methods. This paper further focuses on crucial aspects of the methodology: implementation of low-pass filter and singular value decomposition (SVD) methods, non-invasive measurements and determination of the wall positions using channel correlation and methods based on SVD. Measurements of sound velocity and attenuation of ultrasound in-line were introduced to increase measurement accuracy and provide an interesting approach to determine particle concentration in-line. The UVP-PD methodology presented may serve as an in-line tool for non-invasive, real-time monitoring and process control.     

Effect of Niobium on Microstructure of Cast AISI H13 Hot Work Tool Steel

The effect of niobium addition on the microstructure of cast AISI H13 hot work tool steel was evaluated by using EDX analyzer attached to the scanning electron microscope. The volume percent of eutectic area and eutectic cell size and also volume percent of different carbides of new steel, which is heat treated under different conditions, are also determined. The results show that the a niobium addition modifies the cast structure of Nb-alloyed hot work tool steel, and reduces the size and volume of eutectic cells, and increases the maximum hardness of the steel.     

Speed limit reduction in urban areas: A before–after study using Bayesian generalized mixed linear models

In fall 2009, a new speed limit of 40 km/h was introduced on local streets in Montreal (previous speed limit: 50 km/h). This paper proposes a methodology to efficiently estimate the effect of such reduction on speeding behaviors. We employ a full Bayes before–after approach, which overcomes the limitations of the empirical Bayes method. The proposed methodology allows for the analysis of speed data using hourly observations. Therefore, the entire daily profile of speed is considered. Furthermore, it accounts for the entire distribution of speed in contrast to the traditional approach of considering only a point estimate such as 85th percentile speed. Different reference speeds were used to examine variations in the treatment effectiveness in terms of speeding rate and frequency. In addition to comparing rates of vehicles exceeding reference speeds of 40 km/h and 50 km/h (speeding), we verified how the implemented treatment affected “excessive speeding” behaviors (exceeding 80 km/h). To model operating speeds, two Bayesian generalized mixed linear models were utilized. These models have the advantage of addressing the heterogeneity problem in observations and efficiently capturing potential intra-site correlations. A variety of site characteristics, temporal variables, and environmental factors were considered. The analyses indicated that variables such as lane width and night hour had an increasing effect on speeding. Conversely, roadside parking had a decreasing effect on speeding. One-way and lane width had an increasing effect on excessive speeding, whereas evening hour had a decreasing effect. This study concluded that although the treatment was effective with respect to speed references of 40 km/h and 50 km/h, its effectiveness was not significant with respect to excessive speeding-which carries a great risk to pedestrians and cyclists in urban areas. Therefore, caution must be taken in drawing conclusions about the effectiveness of speed limit reduction. This study also points out the importance of using a comparison group to capture underlying trends caused by unknown factors.     

Real-time processing and compression of DNA microarray images.

In this paper, we present a pipeline architecture specifically designed to process and compress DNA microarray images. Many of the pixilated image generation methods produce one row of the image at a time. This property is fully exploited by the proposed pipeline that takes in one row of the produced image at each clock pulse and performs the necessary image processing steps on it. This will remove the present need for sluggish software routines that are considered a major bottleneck in the microarray technology. Moreover, two different structures are proposed for compressing DNA microarray images. The proposed architecture is proved to be highly modular, scalable, and suited for a standard cell VLSI implementation.     

Synthesis and characterization of novel diimide–dinaphthols and resulting poly(urethane–imide)s

Novel diols containing imide groups were prepared via condensation of aromatic dianhydrides with 5‐amino‐1‐naphthol. The diimide–dinaphthols prepared were characterized by conventional methods and used to synthesize new poly(urethane–imide)s (PUIs). All the polymers were characterized and their physical properties, such as solubility, solution viscosity, thermal stability, and thermal behaviour were studied. The polymers obtained showed more thermal stability than typical polyurethanes because of the presence of the imide groups. Copyright © 2003 Society of Chemical Industry     

Energy storage capacity investigation of pulsed current formed nano-structured lead dioxide

An electro-deposition method was used for the preparation of nano-structured lead dioxide. The lead dioxide films prepared were used as positive electrodes of lead acid batteries. Different parameters such as pulse time (t_on), pulse height, and relaxation time (t_off) were optimized to obtain higher capacity. Depend on the pulse conditions, a range of different morphologies of various porosities and connectivity was obtained. The resulting batteries were discharged to a cut off voltage of 1.75 V by a pulsed current method. The energy storage ability of the prepared lead acid batteries shows a close relation with the morphology of cathode materials. Maximum capacity was observed when pulse and relaxation time was equal to 0.1 and 5 s, respectively, at a current density of 25 mA cm⁻². A change in morphology of lead dioxide from aggregated globular structure to nanofiber was occurred. It was found that the high surface area as well as high connectivity between particles resulted in increased discharge capacity. Analysis of electrochemical impedance spectroscopy (EIS) data revealed that the charge transfer resistance is decreased by a change in morphology from bulk globular to nanofiber as the energy storage test showed. The time dependence of impedance behavior of a sample prepared at t_on = 0.1 s and t_off = 5 s at 25 mA cm⁻² was investigated and the results are discussed.     

Stability problems in universal current-mode filters

Analog circuit designers have usually focused on the design of circuits employing a minimum number of components, occupying less area and dissipating less power. However, some important issues such as signal limitations and especially stability problems of the analog circuits have not received considerable attention in the literature. Hence, the work described in this paper deals with the stability problems of two new current-mode analog filters employing multiple output current controlled conveyors (MOCCCIIs). Toward that end, a single pole model is replaced for each non-ideal current gain of the MOCCCIIs. Both of the novel universal current-mode active-C filters can simultaneously realize low-pass, band-pass and high-pass/notch filter responses. SPICE and MATLAB simulation results are given to verify the theoretical analysis.     

Novel thermally stable poly(ether imide ester)s from 2,6‐bis (4‐aminophenoxy) pyridine

2,6‐Bis (4‐aminophenoxy) pyridine was prepared via reaction of 4‐aminophenol with 2,6‐dichloropyridine in the presence of potassium carbonate in N‐methyl‐2‐pyrrolidone (NMP). This pyridine‐based ether diamine was reacted with two moles of trimellitic anhydride to synthesize related diimide‐diacid (DIDA). A high temperature solution polycondensation reaction of DIDA with different diols in the presence of triethylamine hydrochloride in dichlorobenzene resulted in different poly(ether imide ester)s. The monomer and polymers were fully characterized, and the physical and thermal properties of the polymers were studied. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 96: 570–576, 2005